CLC online shop
WS4 QUATTRO C768.jpg

FALIT serial laser features:

ICO Laser - Decap EMC

Using precise energy control, the focus of ICOTM Laser can remove the epoxy mold compound, while leaving the bonding wire and the lead frame undamaged.
FAQ
How can you control the laser energy from burning the bond wire?
CLC developed APEX laser motion control card, which precisely controls the laser pulse energy and beam motion to ensure the spot energy density does not damage the bond wire.

GEL Laser - Decap Clear Packages

The GELTM Laser beam focus evaporates the silica gel using the GEL-BLUETM solution as a solvent on the last layer above the die, guaranteed non-destructive.
FAQ
Why are we unable to use the ICO laser to do gel removal?
Because the photon energy emitted from ICO laser does not have a good absorption rate when applied to silica gel, Our Gel laser has the proper absorption rated to remove GEL material.

Xsec Laser - Cross Section

The XSECTM Laser emits high peak power pulsed photons that evaporate the desired cross section line with a narrow kerf width.
FAQ
Why do we need the XSEC laser to do the cross section?
Because the XSEC ultrafast laser emits pulses at a picosecond width to gain the zero heat effect zone and yield a clean cut edge.

Xsec Laser - Delidding

The XSECTM Laser emits high peak power pulsed photons that ablate the required material for de-lidding, guarantying non-contamination inside the device.
FAQ
Can we de-lidding the ceramic IC packages?
Yes, the XSEC laser can de-lidding the KOVAR, aluminum alloy and all types of ceramic IC packages. along with PCB material, of course.

ECO Laser - Nondestructive Photochemcial Decap

The ECOTM Laser beam steered by an ultrafast scan in conjunction with the CLC proprietary ECO solvent. The results are non-destructive decap to the die without the aid of acid.
FAQ
How can the high energy laser guarantee non-destructive results? Does this process fit all type of dies?
The ECO laser ultrafast scan using the photochemical solvent, activates and destroys the cross link of EMC. The solvent is the key role to do the decap process. The process is fit for all types of dies, including Si, Ge, GaAs, SiC etc.

Delayering Laser - Inspecting TSV

The DeLayeringTM Laser emits an ultrafast, short wavelength of photons to remove the RDL, layer by layer, to inspect TSV defects in the advanced IC packaging.
FAQ
Can we remove the RDL layer without damage the underneath layer?
Yes, by controlling the laser focal depth to be less than the isolation layer thickness. The process works with the PicoeyeTM 5 micron video microscope. The use of the Picoeye during the process success guarantees measurable results.
Previous slide
Next slide

Change selection by your application to find instant quote for budget :

guaranteed safe checkout.svg
RFT.png
Not sure which laser to choose?
Click RFT to request free test
BYO.png
Quick check available feature
Click BYO to build your own

More standard Models for FALIT...

$437,200.00$1,356,100.00

Select options This product has multiple variants. The options may be chosen on the product page

$173,540.00$1,013,600.00

Select options This product has multiple variants. The options may be chosen on the product page

$111,800.00$767,100.00

Select options This product has multiple variants. The options may be chosen on the product page

$66,900.00$649,800.00

Select options This product has multiple variants. The options may be chosen on the product page

Send Message :

Share this Page :

Browse Products :

2024 © Control Laser Corp, All Rights Reserved