Kelley, thank you for all of your effort. It’s noted that the service we got was excellent on your behalf. From all of us at the GE site here in Houston, Thank you! Date: 7/22/2015

- David from GE Electric

Thank you for your concern and quick repair of our laser lens. We were able to bolt it back on and now production has resumed full force. Thanks again for your speedy recovery time and your assistance in getting us back up and running. Date: 8/17/2016

- Derick from Baldor

I am writing to give feedback on the visit we had this week with Casey and the install and training he provided for our newly retrofitted FALIT tool. For both myself and Greg, we can’t speak highly enough of Casey’s abilities, knowledge and professionalism. The installation went almost without a hitch and Casey spent all the time necessary to both dial in our processes, and train us on the various settings and applications. I am confident that if and when we need support for this tool, we won’t go wrong if Casey is involved. Date: 3/20/2015

- Denis from Sandia National Labs

I wanted to reach out again and thank you for all the hard work CLC put in the last year. The whole team here appreciated the level of effort you were able to provide. Date: 1/10/2018

- Bill from Yeti

Farrukh, Thank you and the team for the outstanding job performed on the upgrade of our F-20 laser marker. We were able to complete the electronic upgrade without any lost production time. The laser works great. Thanks again!!! Date: 6/20/2018

- Bradley Capitol Manufacturing

We received the part last night and installed it. The unit has been working without issue for almost 3 shifts now, so I believe the prescribed repair fixed the unit. Thank you to you and your team for getting this turned around so quickly. Date: 2/1/2018

- John from Hoerbiger

Hi Farrukh, I would like to express my appreciation on the excellent job James did for us. He made the tool work and resolved the trench issues that we had for four years. Thanks for his and your support. Date: 8/22/2016

- Wanming from Skyworks

Thank you for the fast service!! Date: 9/25/2018

- Ron from Micro-Matic

Received the parts. Well done! Thank you. Date: 12/16/2018

- John from TMG Performance

You da man James. Date: 10/21/2017

- Bill from Adept Engraving

Casey did a great job getting us trained up. He was very professional and tirelessly helped my team and I get familiar with the FALIT system.  We have an unusual amount of rigor that goes with setting up a new machine. Casey delivered all the information we needed to get our safety officer to certify the machine. It was a pleasure having him out to Idaho to help us set the laser system up. Date: 11/12/2015

- Reston from Idoha National Laboratory

Hi Tom, I wanted to thank you for your support getting through the software upgrades we requested. Anton was great to work with and everything seems to be working straight out of the gate. Date: 11/13/2017

- David from Eaton

Thank you all again for taking some time to help me yesterday; I really do appreciate it! Date: 5/23/2018

- Kevin from AO Precision Manufacturing

Anton, I took the software for a ‘test drive’ today. I only changed and tested 1 SKU but overall it looked great. We’ll continue our testing but right now I don’t see any issues. I was able to find the Work Order log and it collected the required data on the 2 dummy work orders I entered. Very nice. Will keep you posted as we do more testing. Thanks. Date: 11/16/2018

- Paul from 3M

Anton, I have managed to remove the cleaning pass. Thank you for your assistance throughout the implementation. We are satisfied with the result now. Best Regards. Date: 11/16/2018

- Thomas from Hoerbiger

Anton, all worked as you described. Was able to access secondary PC’s no issue – there was a shortcut to the slave laserHi folder on each of the lasers. Thanks!!! Date: 1/3/2017

- Eric from 3M

All, great thanks to Farrukh and Anton for the quick assistance this morning. Looks like we have addressed the issue. Date: 3/7/2018

- David from Eaton

We received the equipment and we evaluated it, and all is ok, very good. Great job! Thanks.

- Rivera from Smiths Interconnect

Big shout out to Channing, he did a great job and got us back up. Showed me how to adjust the image quality which makes a big difference. Thank you for your quick support too. It is very much appreciated.

- Ray from Renesas Electronics

Free tests for your workpiece samples!

Match your application with right machine configuration before you buy

Bad Authentication data.

Contact Us (407) 926-3500 Price Match Online Order Guide